SnoMaster SM-26
26Kg/24Hr Plumbed-In Bullet Type Ice-Maker - Stainless Steel
For the serious home entertainer, upgrade your ice game with the SM-26 Plumbed-in Ice-Maker. With the ability to produce up to 26kg of bullet-shaped ice in 24 hours, this sleek stainless steel appliance ensures that the ice keeps flowing, without the need for constant water top-ups. It’s more than just an ice-maker; it’s a seamless integration into your lifestyle, keeping your drinks chilled and your parties going.
Product Features:
- ON/OFF Switch
- 6Kg Ice Bin
- Ice Full Sensor
- Water Low Sensor
- Disposable Water Filter Cartridge Included
- Dimensions (mm) Unit: (H) 655 (L) 425 (W) 540
- Dimensions (mm) Packaged: (H) 695 (L) 485 (W) 585
- Storage Bin Volume: 6Kg
- Rated Current: 1.1A
- Net Weight: 33Kg
- Ice Type: Bullet Ice
- Ice Making Capacity: 26Kg/24h
- Ice Bullet Size (mm): H 36, D 26
- Voltage: 230V/50Hz
- Total Input Power: 300W
- Design Criteria: Engineered for the African climate.
- Suggested Application Home Bar, Kitchen, B&B, Hotel,Café, Cocktail Bar, Office
- Finishes: Black Gloss Stainless Steel
The ice-maker does not switch on
- Check if the ice-maker is correctly switched on.
- Check if there has not been loadshedding or a power cut.
- Make sure you have followed the installation requirements correctly Water shortage indicator light is on
- Check the water supply and if the inlet pipes are pinched or the water filter is blocked, if there are no obstructions restart the ice-maker.
- Check if the water pressure is between 2 and 4 bar pressure.
- Check if the water box nut is loose and tighten accordingly.
- The water solenoid valve could be faulty.
- The water level sensor is dirty and will need to be cleaned or replaced. Compressor doesn’t work
- Check if the condenser fan is working.
- Remove some ice. Ice full light might be on.
- The compressor is faulty Compressor works, but no ice is being made
- The refrigerant has leaked and will need to be re-gassed.
- The gas solenoid valve will need to be replaced
- . The appliance has a blockage and will need to be flushed and re-gassed.
- Check if the condenser fan is working. Ice is not dropping or struggling to drop
- Check if the ambient temperature is too low (lower than 10°C) or water temperature is too low (lower than 7°C)
- Replace the gas solenoid valve.
- The water/evaporator sensor is faulty.
- The circulation pump is faulty and the ice is getting stuck together and not releasing
